AIPTEK PocketCam 1.3M Smart Manuale Utente

Version 1.1 1 PORTABLE WLAN SERVER ROUTER 3,5G PRO User Manual

Version 1.1 10 Safe Seating Gestures You should follow the manufacturer’s instructions for adjusting the backrest to fit your body properly. An

100 Version 1.0 3.7.2 User Account List This section shows all users’ information. Check the user name, status and opened directory/file on

101 Version 1.0 3.7.3 Event Log MT4205 provides system logs for review. The system status log shows logging time, type and detail

102 Version 1.0 Notice: If the homepage doesn’t appear, please check whether the TCP/IP configuration is obtaining IP address autom

103 Version 1.0 MT4205 provides personal control panel for every login user’s entrance to each application screen, please click on eac

104 Version 1.0 Notice: If you can’t access Anonymous folder, please check with administrator to enable your FTP server rights. Files under t

105 Version 1.0 3.9.3 My Webcam Click My Webcam, and the system pops up a new window to display real time image as the example below shows.

106 Version 1.0 Notice: All above usage information is based on administrator’s setup. 3.10 Site Map MT4205 provides site map clicking for ea

107 Version 1.0 Chapter 4 AP Mode 4.1 Administrator Quick Setup Instruction Make sure to switch the mode into AP Mode, then open a Microsoft Int

108 Version 1.0 User Name and Password The default values for User Name and Password are admin (all in lowercase letters). Click Login to enter.

109 Version 1.0 The above diagram shows all PCs and devices connected to your MT4205 and their status. Click Quick Setup on th

Version 1.1 11 Chapter 1 Introduction 1.1 Overview MT4205 might be small in size, but is huge in functionality, supporting multiple operation mod

110 Version 1.0  LAN Setup: Setup the IP Address for LAN and Group. If you are using the Router with multiple PCs on your LAN, you must connect t

111 Version 1.0 1 and 253 that is not used by another device.) Please don’t change the default LAN IP settings at this section until after you have

112 Version 1.0 requests from unauthorized wireless clients. As the Encryption Type, select WEP or WPA can protect your data from eavesdropper

113 Version 1.0 Moreover, WDS (Wireless Distribution System) is a Wireless Access Point mode that enables wireless bridging in which WDS

114 Version 1.0 4.2.5 USB Disk Management Setup Easy to check all the USB storage devices connected to your MT4205, view the entire data folder

115 Version 1.0 Set each user’s right and space arrangement, and then click on Add button for saving user’s account. Click on Next button aft

116 Version 1.0 4.2.8 Printer Server Setup MT4205 supports LPR-protocol, as well as NetBIOS, and is convenient for sharing printer. In other wor

117 Version 1.0 Click on Next button to next setup. 4.2.11 Quick Setup Finish The Quick Setup has been completed successfully when you see thi

118 Version 1.0 1. IP Address The default value of LAN IP address is 192.168.1.254 for this router. 2. IP Netmask Fill in Subnet Mask, normal

119 Version 1.0 8. Router This field indicates the IP address of DNS to provide to clients that request IP Address from DHCP Server, the default s

Version 1.1 12 1.2 Features MT4205’s main functions, including Wireless Access, Printer Server, Webcam Monitor, Samba Server, FTP Server

120 Version 1.0 1. Wireless Select AP/Bridge or WDS to allow or disallow the wireless operation. 2. Wireless Mode This field indicates the 802.

121 Version 1.0 The 802.11g and 802.11b specification supports up to 14 overlapping Channels for radio communication. But only 11 Channels are supp

122 Version 1.0 Note: 128 bits WEP is most secure, but has more encryption/decryption overhead. Note that all wireless devices must support the sa

123 Version 1.0 Radius with 802.x: Check this circle to enable Radius client function. WPA Rekey Timer: Allows for the session keys to be ref

124 Version 1.0 4.4.1 Samba Server By supporting NetBIOS Protocol, MT4205 provides LAN users to share files or printer via My Network Places. Cli

125 Version 1.0 Please follow the steps below. 【Step 1】 Go to Start and click My Computer. 【Step 2】 Fill in blank address field with \\192.168.1

126 Version 1.0 【Step 4】 As the window below appears, login user has entered file sharing directory, and the folders underneath are al

127 Version 1.0 1. Enable FTP Server: The Enable for FTP Server only can be selected when USB storage device plugged. 2. Enable Anonymo

128 Version 1.0 4.4.3.1 Web Camera Server Basic Setup 1. Enable Webcam Server: Allow using this function by checking on enable. 2. Access fr

129 Version 1.0 HDD or remote FTP; if select save to remote FTP, please continue following remote FTP setting. 4. USB HDD Directory: The section p

Version 1.1 13 1.3 Specifications Interface Components CPU Star 9105gu Flash ROM 8Mbyte (NAND Gate) DRAM 32MByte WAN Port 1 x 10/100 Mbps RJ45, w

130 Version 1.0 surveillance tools for home or office security; network Webcams are now being employed by early adopters for more personal matters,

131 Version 1.0 【Step 2】 Enter the default value, admin, for both administrator’s name and password and log in the product’s main menu page. 【

132 Version 1.0 【Step 4】 Click Remote Management under System Management directory and change HTTP Connection Port into 800. Click Apply

133 Version 1.0 4.4.3.3.2 Web Camera Recording 4.4.3.3.2.1 Administrator Setup MT4205 also can record the pictures from Webcam; only Administ

134 Version 1.0 After click on Disk Explorer, you will see the folder screen appear including all the folders inside MT4205. (Below is the examp

135 Version 1.0 All the users under administrator’s setting can view webcam real-time images from My Webcam. Please log in with y

136 Version 1.0 4.4.4 Printer Server Follow the illustrations below to set up your MT4205 and USB-connected printer. 1. Enable Printer Ser

137 Version 1.0 After setting USB printer on MT4205’s setup page, please go to Start > Printers and Faxes to add a printer. 【Step 2】 Click o

138 Version 1.0 【Step 5】 Select Create a new port and choose Standard TCP/IP Port from drop-down list, then click Next. 【Step 6】 Click Next.

139 Version 1.0 Put in MT4205’s address: 192.168.1.254 and click Next. 【Step 8】 Select Custom and click on Settings… button to set the detail set

Version 1.1 14 1.3.1 Six Views of Product Appearance

140 Version 1.0 【Step 10】 Click Finish on the next screen after the aforesaid settings, you have to install the printer driver as well. It has

141 Version 1.0 【Step 11】 Select the Manufacturer and Printers. If your printer is not listed in the table, please insert its driver CD and then

142 Version 1.0 4.5 System Management MT4205 provides system management including password changing, firmware upgrade, time setting, user’s ac

143 Version 1.0 1. Old Password: Enter the original password you set. 2. New Password: Enter the new password you want to change. 3. New Pass

144 Version 1.0 1. Update Firmware: Click Browse to search your local hard drive and locate the firmware used for update. 2. OK & Cancel Clic

145 Version 1.0 4.5.5 Remote Management Remote Management allows MT4205 to be configured from the Internet by a web browser. In general, only a

146 Version 1.0 4.5.6 Time The system automatically shows the local time and time on PC. You can set the date and time manually so that it can be

147 Version 1.0 1. Enable/Disable UPnP: Select to enable or disable this service. 2. Apply, Cancel Click Apply to activate this function or

148 Version 1.0 1. Max Login User: Set up the maximum users to log in at the same time, select the number from drop-down list. If you want

149 Version 1.0 1. Select the USB Disk and click OK for refreshing all disks before you perform disk partition, and the Unplug button app

Version 1.1 15 1.4 System Requirements To begin with MT4205, you must have the following minimum system requirements. If your system can’t

150 Version 1.0 1. Email Alert: Check the enable box to activate the email alert service. 2. SMTP Server: Specify an IP address of the SMTP se

151 Version 1.0 7. Email Address (To): Enter the email address where to receive the alert. 8. Schedule: Arrange to send the alert when event happ

152 Version 1.0 4.6.2 User Account List This section shows all users’ information. Check the user name, status and opened directory/file on

153 Version 1.0 The system status log shows logging time, type and detail information as below. Click Refresh to update. 4.7

154 Version 1.0 Click Personal Panel and log in with your own user account. (If you can’t access your personal account, please check with adminis

155 Version 1.0 MT4205 provides personal control panel for every login user’s entrance to each application screen, please click on eac

156 Version 1.0 Notice: If you can’t access Anonymous folder, please check with administrator to enable your FTP server rights. Files und

157 Version 1.0 4.8.3 My Webcam Click My Webcam, and the system pops up a new window to display real time image as the example below shows.

158 Version 1.0 Notice: All above usage information is based on administrator’s setup. 4.9 Site Map MT4205 provides site map clicking for eac

159 Version 1.0 Chapter 5 Client Mode 5.1 Administrator Quick Setup Make sure to switch the mode into Client Mode, then open a Microsoft Internet

Version 1.1 16 【Step 2】 Click on Properties 【Step 3】 Double click on Internet Protocol (TCP/IP).

160 Version 1.0 User Name and Password The default values for User Name and Password are admin (all in lowercase letters). Click Login to enter.

161 Version 1.0 The above diagram shows all PCs and devices connected to your MT4205 and their status. Click Quick Setup on th

162 Version 1.0 Select the preferred AP for connection, for example, Storage_Fax_Server_Router as the above, and click Next to continue. 5.2.2

163 Version 1.0 5.2.3 Time Server Setup MT4205 shows local date and time; however, the time still can be changed manually by selecting from the d

164 Version 1.0 Easy to check all the USB storage devices connected to your MT4205, view the entire data folder inside each storage device, a

165 Version 1.0 5.2.7 FTP Server Setup MT4205 can be the FTP Server providing users to transmit files, also for the guest to download the

166 Version 1.0 shared web surfing, and supports USB interface printer. Any users in the same subnet of MT4205 can print their document via the net

167 Version 1.0 To apply your new settings, please click on Finish button to reboot system automatically and go to the product’s diagram homepage.

168 Version 1.0 This field specifies the last address in the pool to be assigned by the DHCP server in your local network. The default setting is 7

169 Version 1.0 4. SSID Name your wireless network, and the default is previously selected wireless AP. 5. bg Mode This field indicates the 802.1

Version 1.1 17 【Step 4-1】 For getting IP automatically if you are one of the users under MT4205, please skip Use the following IP address and then

170 Version 1.0 TKIP & AES PSK Key The applied algorithm is like WPA. However, WPA-PSK is using a simple code to generate the key

171 Version 1.0 1. Enable Samba Server Check to Enable/Disable while connecting. 2. Workgroup Name Fill in the name, and the default is Workgr

172 Version 1.0 【Step 2】 Fill in blank address field with \\10.64.64.64. 【Step 3】 A window pops up asking for user name and password.

173 Version 1.0 Note: Only 2 icons show up at most. 1. If a USB flash drive/hard disk is connected and enabled, the samba folder shows up. 2. I

174 Version 1.0 3. Enable FTP Access from WAN: Allow FTP access from WAN side by checking on Enable for this item. 4. FTP Server Port: Define

175 Version 1.0 5.4.3.2 Web Camera Server Advanced Configuration Click Record Setting, and the screen below appears. 1. Enable save image: If

176 Version 1.0 5.4.3.3 Application for Web Camera 5.4.3.3.1 Web Camera Monitoring Application Monitor your home or take pictures with

177 Version 1.0 Follow instructions below to set up WAN IP address. 【Step 1】 Click Network Configuration under the directory of Log & Status

178 Version 1.0 【Step 3】 Click Virtual Server under the directory of NAT in Advance setup. Then check Enable and put 192.168.1.2 in Private IP fi

179 Version 1.0 Plug internet wire into the WAN port and connect to your PC. Then open your web browser and fill in http://192.168.1.2/webcam.html

Version 1.1 18 1.5.1 Network Testing There are two ways to test your Network whether it can work on Internet or not. They are ―Testing with In

180 Version 1.0 To set up the Webcam Advanced Configuration for each text box, the image from webcam will be recorded into your USB HDD or R

181 Version 1.0 For getting the images from web camera or any files inside router, you may copy the files into your own HDDs directly. In a

182 Version 1.0 After click on My Document, you will see folder screen appear as the example below. You can store files here, too. Notice: If

183 Version 1.0 Follow the illustrations below to set up your MT4205 and USB-connected printer. 1. Enable Printer Server: Check enable for app

184 Version 1.0 【Step 2】 Click on Add a printer item. 【Step 3】 Click on Next button. 【Step 4】 Select Local printer attached to this computer,

185 Version 1.0 【Step 5】 Select Create a new port and choose Standard TCP/IP Port from drop-down list, then click Next. 【Step 6】 Click Next.

186 Version 1.0 【Step 7】 Put in MT4205’s address: 10.64.64.64 (as in Client Mode) and click Next. 【Step 8】 Select Custom and click on Settings… b

187 Version 1.0 【Step 10】 Click Finish on the next screen after the aforesaid settings, you have to install the printer driver as well. 【Step 1

188 Version 1.0 You can name your printer, set it as default printer and share your printer as the next screen shown, the Printer Server setti

189 Version 1.0 5.5 System Management MT4205 provides system management including password changing, firmware upgrade, time setting, user’s a

Version 1.1 19 【Step 1】 Go to start > Run. 【Step 2】 Input cmd in the blank, and then click OK button. The Command Prompt window appears. 【

190 Version 1.0 1. Old Password: Enter the original password you set. 2. New Password: Enter the new password you want to change. 3. New Pass

191 Version 1.0 1. Update Firmware: Click Browse to browse the local hard drive and locate the firmware used for update. 2. OK & Cancel Clic

192 Version 1.0 configuration from hard drive, and then click on Load button to load all the settings into the router. 3. Restore To Factory De

193 Version 1.0 2. Remote Management: You can allow any Internet IP address to access the router, or set up deny rule according to IP setting. 3.

194 Version 1.0 1. Local Time: The default time within. 2. Set the Time: Select this item to set up time by manual, select the date and time from

195 Version 1.0 1. Max Login User: Set up the maximum users to log in at the same time, select the number from drop-down list. If you want

196 Version 1.0 7. User Account List The list shows all users’ names, passwords, status and rights. 5.5.9 Folder Management Easy to check all

197 Version 1.0 5.5.10 Email Alert To monitor router activity, you can run on a local PC or a remote one elsewhere on the Internet. And MT420

198 Version 1.0 2. SMTP Server: Specify an IP address of the SMTP server which can send mails from your MT4205 to the recipients’ mailboxes direct

199 Version 1.0 5.6.2 User Account List This section shows all users’ information. Check the user name, status and opened directory/file on

Version 1.1 2 Table of Content FCC CAUTION ...

Version 1.1 20 If it can’t work, it will show Request timed out.

200 Version 1.0 The system status log shows logging time, type and detail information as below. Click Refresh to update. 5.7

201 Version 1.0 Homepage Click Personal Panel and log in with your own user account. (If you can’t access your personal account, please check wi

202 Version 1.0 MT4205 provides personal control panel for every login user’s entrance to each application screen, please click on eac

203 Version 1.0 Notice: If you can’t access Anonymous folder, please check with administrator to enable your FTP server rights. Files und

204 Version 1.0 5.8.3 My Webcam Click My Webcam, and the system pops up a new window to display real time image as the example below shows.

205 Version 1.0 Notice: All above usage information is based on administrator’s setup. 5.9 Site Map MT4205 provides site map clicking for eac

206 Version 1.0 Chapter 6 DDNS Service Application DDNS is a service changes the dynamic IP to the static IP. The settings of DDNS can solve the pr

207 Version 1.0

208 Version 1.0 【Step 3】 When you got this account created message, close it, and check your mailbox. You would get a mail from DynDNS website. 【

209 Version 1.0 【Step 7】 Click Add New Hostname. 【Step 8】 Put in your favorite hostname and service type, and then click Create Host after fini

21 Version 1.0 Chapter 2 Hardware Installation 2.1 Diagram of Connecting Hardware to MT4205 MT4205 is a portable and convenient wireless s

210 Version 1.0 【Step 9】 Your hostname has been created when you see the following page. Chapter 7 Q & A 7.1 Installation 1. Q: Where is

211 Version 1.0 A: In case MT4205 is inaccessible, you can try to restore its factory default settings. Please press the ―Reset‖ button and keep

212 Version 1.0 A: It’s possible that your Internet protocol (TCP/IP) was set to use the following IP address. Please do as the follo

213 Version 1.0 2. Select never dial a connection, click on Apply button, and then click on OK button. 3. Click on Tools and then click on Interne

214 Version 1.0 Rule1: After connecting USB devices, please reboot your Router. Rule2: Before finishing the DHCP setup, please don’t connect any

215 Version 1.0 A: Check the DNS server settings on your PC. You should get the DNS servers settings from your ISP. If your PC is run

216 Version 1.0 Next make sure the router and the NIC are configured to use the same communications channel. There are normally 11 of

217 Version 1.0 A: The wireless system will connect at highest possible speed, depending on the distance and the environment. To obtain

218 Version 1.0 6. Q: The WinXP wireless interface couldn’t communicate the WEP with MT4205’s wireless interface. A: The default WEP of WinXP is A

219 Version 1.0 then the user can start to use the function of MT4205. 4. Q: How to remove or revise the files on FTP server? A: If there is any

22 Version 1.0 2.1.2 AP Mode Hardware Connection and Application Under AP Mode, it supports 2 LAN ports as Bridge, and user can connect to MT4205

220 Version 1.0 6. Q: Why couldn’t the image of USB Webcam be seen from WAN? A: Besides making sure to enable the USB Webcam Access from WAN, the

221 Version 1.0 7.12 Others 1. Q: Why can’t I receive corrupted FTP downloads? A: If you are experiencing corrupted files when you download a f

222 Version 1.0 8.2 Web Camera MT4205 supports OV511, OV511+, OV518, OV518+, SAA8115HL and SAA8116HL chipsets; besides, adding spca5xx/L

223 Version 1.0 Lifetec LT 9388 OV511 Logitech QuickCam 3000 Pro SAA8116HL Logitech QuickCam 4000 Pro SAA8116HL Logitech QuickCam Orbit/Spher

224 Version 1.0 Terratec TerraCam PRO OV511+ Terratec TerraCam USB PRO OV511+ Waytech I-Pac VIC-30 OV511+ Webeye 2000B OV511+ Vendor Name Product

225 Version 1.0 Creative WebCam Live! Motion -- Creative WebCam Live! Ultra -- Creative WebCam Live! Ultra for Notebooks -- Creative Webcam M

226 Version 1.0 Logitech QuickCam Chat zc030x Logitech QuickCam IM zc030x Logitech QuickCam IM zc030x Logitech QuickCam IM zc030x Logitech QuickCam

227 Version 1.0 A-DATA My Flash PD1 (512MB) USB2.0 Zynet PD-A2 USB 2.0 Maxtor DiamondMax Plus8 USB 2.0 Kingston Data Traveler 2.0 Shuttle SFD-0128

228 Version 1.0 3. Safari ver. 2.0.4 or higher version 8.6 Easy Setup MicroSoft: Windows 2000, XP, Vista 8.7 Communications Regulation Inform

23 Version 1.0 Chapter 3 Router Mode 3.1 Administrator Quick Setup Instruction Make sure to switch the mode into Router Mode, then open a Microso

24 Version 1.0 User Name and Password The default values for User Name and Password are admin (all in lowercase letters). Click Login to en

25 Version 1.0 The above diagram shows all PCs and devices connected to your MT4205 and their status. Click Quick Setup on the

26 Version 1.0 Quick Setup Instruction  WAN Setup: Setup the connecting type provided by your ISP, 5 modes of WAN connection are

27 Version 1.0 Choose your WAN type as the above mentioned, and its associated settings will show up underneath at the same time. 3.2.1.1 WAN

28 Version 1.0 Please click on Next button to go on 3.2.2 LAN Setup. 3.2.1.2 WAN Type – Dynamic IP Choose Dynamic IP to obtain IP address info

29 Version 1.0 IP connection is back during the next detection. Click on Next button to go on 3.2.2 LAN Setup. 3.2.1.3 WAN Type –

Version 1.1 3 3.2.8 Firewall Setup ... 38

30 Version 1.0 In particular, here provides 3G or 3.5G transmission rate when the device is plugged, either a 3.5G USB Dongle or Card Bus; just che

31 Version 1.0 This option is typically used for DSL services. Some DSL service providers supply a special DSL modem. This kind of mo

32 Version 1.0 Please enter the account’s name and password which provided by your ISP, and then click on Next button to go on 3.2.2 LAN Setu

33 Version 1.0  Always: Stay connected all the time. After the Quick Setup is finished, the Internet connection is on automatica

34 Version 1.0 each device residing on your LAN. The LAN IP address identifies the router as a node on your network; that is, its IP address must b

35 Version 1.0 For selecting configuration utility in AP/Bridge wireless connection, the Channel 6 is the default channel; all devices on th

36 Version 1.0 router’s date and time does not affect the date and time on your PCs. Select your time zone from the Time Zone drop-down list, or y

37 Version 1.0 3.2.6 USB Disk Management Setup Easy to check all the USB storage devices connected to your MT4205, view the entire data folder

38 Version 1.0 Set each user’s right and space arrangement, and then click on Add button for saving user’s account. Click on Next button afte

39 Version 1.0 The default setting for Firewall Protection Level security is Low, which attacks Blocking Policy, allow all Inbound and Ou

Version 1.1 4 3.6 SYSTEM MANAGEMENT ... 88 3

40 Version 1.0 3.2.10 FTP Server Setup MT4205 can be the FTP Server providing users to transmit files, also for the guest to download the

41 Version 1.0 If you plan to use MT4205 as a Web Camera site, connect a supported USB Web Camera to the USB port of MT4205. Check to enable the s

42 Version 1.0 To apply your new settings, please click on Finish button to reboot system automatically and go to the product’s diagram homepage

43 Version 1.0 If you applied for a Static IP connection type from ISP, please follow the steps to set up your WAN connection. 1. IP Address In

44 Version 1.0 This feature requires user to enter user name, password and SIM PIN etc.; also it is working as mutual backup for other 4 WAN Types.

45 Version 1.0 1. Host Name The host name is optional; but if your ISP requires you to input a specific host name, please put it in, for example

46 Version 1.0 working as mutual backup for other 4 WAN Types. That is, setting up the interval time to auto detect whether the Internet connection

47 Version 1.0 1. User Name Input your user name supplied by ISP. If you don’t know, please check with your ISP. 2. Password Input your Pas

48 Version 1.0 1. PPTP Select connect to PPTP by Dial On Demand, Always Online or Manual connects. 2. PPTP Account Input the PPTP Account suppli

49 Version 1.0 5. PPTP Server IP Input the Server IP supplied by ISP. If you don’t know, please check with your ISP. Input the WAN IP address prov

Version 1.1 5 4.3.1 LAN ...

50 Version 1.0 When 3.5G signal cannot be reached, the system starts to search downward for 3/2.75/2.5G signals until none existed. 1.

51 Version 1.0 Connect to the Internet by setting up each time. After the Setup is finished, user has to go to Network Configuration page to manual

52 Version 1.0 8. DNS This field indicates the IP address of DNS to provide to clients that request IP Address from DHCP Server, the default setti

53 Version 1.0 1. Wireless Select AP/Bridge or WDS to allow or disallow the wireless operation. 2. Wireless Mode This field indicates the 80

54 Version 1.0 5. Channel IEEE 802.11g and 802.11b devices are direct sequence spread spectrum devices that spread a radio signal over a range of

55 Version 1.0 WEP Keys. The ―1280bit‖ method is more secure than the ―64-bit‖. Key Type: For 64bits WEP key, either 5 ASCII characters or 10 h

56 Version 1.0 Radius with 802.x: Check this circle to enable Radius client function. WPA Rekey Timer: Allows for the session keys to be refre

57 Version 1.0 1. Service Provider Choose correct Service Provider from drop-down list, here including dyndns, dhs, ods and tzo embedded in MT4

58 Version 1.0 3.4.1 NAT NAT is a method of mapping one or more IP addresses and/or services ports into different specified services, where NAT

59 Version 1.0 into MT4205. 2. Description: Enter the description of the virtual server, this field allows you to record what this rule is used fo

Version 1.1 6 4.9 SITE MAP ...

60 Version 1.0 3.4.2 Firewall The Firewall function helps to protect your local network against attacks from outside. It also provides a way o

61 Version 1.0 1. Firewall Protection Level: Select the level from the drop-down list, including High, Medium and Low. The below screen inc

62 Version 1.0 the FTP server machine and an arbitrary port on another system. This connection may be used to bypass access controls that would oth

63 Version 1.0 The list shows all the DoS attacks blocking items. 3.4.2.2 IP Filter Use IP Filter to deny LAN IP addresses from accessing the

64 Version 1.0 2. Enable Log: All packets between WAN and LAN will be logged. 3. Source: To specify the appropriate IP address / mask an

65 Version 1.0 1. MAC Filter Action: To deny or allow all MAC filter action. 2. Enable MAC Filter: Check enable or disable to apply MAC Filter f

66 Version 1.0 1. Enable URL Filter: Check enable or disable to apply URL filter function. 2. Enable log: All packets between WAN and LAN w

67 Version 1.0 3.4.3 QoS Quality of Service (QoS) refers to the capability of a network to provide better service to selected network traffic ove

68 Version 1.0 1. Enable QoS Service: One checkbox appears to activate the QoS control function or not. Click it to force the router to perform Qo

69 Version 1.0 1. Enable Samba Server Check to Enable/Disable while connecting. 2. Workgroup Name Fill in the name, and the default is Workgrou

Version 1.1 7 5.5.4 Profile Save ... 191

70 Version 1.0 【Step 2】 Fill in blank address field with \\192.168.1.1. 【Step 3】 A window pops up asking for user name and password.

71 Version 1.0 Note: Only 2 icons show up at most. 1. If a USB flash drive/hard disk is connected and enabled, the samba folder shows up. 2. I

72 Version 1.0 1. Enable FTP Server: Enabling selection for FTP Server only can be checked when USB storage device is plugged. 2. Enable Anonymo

73 Version 1.0 3.5.3.1 Web Camera Server Basic Setup 1. Enable Webcam Server: Allow using this function by checking on enable. 2. Access fro

74 Version 1.0 HDD or remote FTP; if select save to remote FTP, please continue follow-up remote FTP setting. 4. USB HDD Directory: The section pr

75 Version 1.0 monitoring or recording of all images into the USB HDD for reviewing. Often marketed as surveillance tools for home or office securi

76 Version 1.0 Input the WAN IP Address (as you see on above screen) into browser blanks. You will see the personal account login screen appe

77 Version 1.0 Please fill the WAN IP address plus ―/webcam.html‖ (e.g. http://210.64.134.25/webcam.html) into the mobile phone’s browser blan

78 Version 1.0 MT4205 also can record the pictures from Webcam; only Administrator can activate the settings. Select Web Camera Server from main Me

79 Version 1.0 After click on Disk Explorer, you will see the folder screen appear including all the folders inside MT4205. (Below is the example.

Version 1.1 8 8.3 USB DEVICES ...

80 Version 1.0 After click on My Document, you will see folder screen appear as the example below. Notice: If you can’t open the folder, ple

81 Version 1.0 MT4205 has two USB ports for connecting with printers to be shared on the local area network. Follow the steps to set up your PC to

82 Version 1.0 After setting USB printer on MT4205’s setup page, please go to Start > Printers and Faxes to add a printer. 【Step 2】 Click o

83 Version 1.0 【Step 4】 Select Local printer attached to this computer, and click Next. 【Step 5】 Select Create a new port and choose Standard T

84 Version 1.0 【Step 6】 Click Next. 【Step 7】 Put in MT4205’s address: 192.168.1.1 and click Next.

85 Version 1.0 【Step 8】 Select Custom and click on Settings… button to set the detail setting. 【Step 9】 Select LPR and give it the same Queue N

86 Version 1.0 【Step 10】 Click Finish on the next screen after the aforesaid settings, you have to install the printer driver as well. 【Step 11

87 Version 1.0 insert its driver CD and then click on Have Disk… button for installation. Or click on Next button to finish the setting. You can

88 Version 1.0 3.6 System Management MT4205 provides system management including password changing, firmware upgrade, time setting, user’s ac

89 Version 1.0 1. Old Password: Enter the original password you set. 2. New Password: Enter the new password you want to change. 3. New Pass

Version 1.1 9 FCC Caution The device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: 1. This device

90 Version 1.0 1. Update Firmware: Click on Browse… button to search your local hard drive and locate the firmware to be used for

91 Version 1.0 1. Save Settings To PC: Click on Save button for saving the configuration setting into assigned location. 2. Load Settings F

92 Version 1.0 1. HTTP Connection Port: The port number used to access the router. 2. Remote Management: You can allow any Internet IP addres

93 Version 1.0 3.6.6 Time The System time is the time used by MT4205 for scheduling services. You can manually set the time or connect to a NTP (

94 Version 1.0 Click on Apply button to activate, or Cancel button to clear the settings. 3.6.7 UPnP Setting UPnP (Univsersal Plug and Play) all

95 Version 1.0 1. Max Login User: Set up the maximum users to log in at the same time, select the number from drop-down list. If you want to c

96 Version 1.0 4. User Right: Check to allow set-user accessing Samba folder, monitoring from webcam or using FTP server. 5. Activated: Click On

97 Version 1.0 Notice: You have to click on Unplug button before removing the USB device from MT4205. 3.6.10 Email Alert To monitor router ac

98 Version 1.0 1. Email Alert: Check the enable box to activate the email alert service. 2. SMTP Server: Specify an IP address of the SMTP serv

99 Version 1.0 11. Refresh & Delete Click on Refresh to renew the login data and other system status information, or click on Delete to clear t